Motorola CDM1250 사용자 설명서 - 페이지 23
{카테고리_이름} Motorola CDM1250에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola CDM1250 50 페이지. Cdm-series control station
Motorola CDM1250에 대해서도 마찬가지입니다: 서비스 및 설치 매뉴얼 (32 페이지)
페이지 인쇄
RESPONDING TO EMERGENCY
ALERTS (
Your radio offers choices for initiating and
responding to Emergency Alert
communications. Choices may include:
•
Emergency Cycles - Allows the radio to
automatically cycle between transmit and
receive mode over a preprogrammed
number of times by keying with voice after it
has received an Acknowledge to the alarm
you send. The default number of transmits
is one (10, maximum); the default value of
the retransmit interval is 5 seconds (one,
minimum; 60, maximum).
•
Emergency Alarm/Call - Gives you access
to a voice resource, on a priority basis, over
all other types of call traffic.
•
Emergency Remote Monitor - Enables the
dispatcher to activate the transmit circuit of
your radio, during an Emergency, to hear
the situation through your microphone. See
page 23 for more about sending an
Emergency Remote Monitor.
•
Remote Monitor - Enables the dispatcher to
activate the transmit circuit of your radio,
during a normal dispatch, to hear the
situation through your microphone. See
page 23 for information about sending a
Remote Monitor.
Note: All the choices listed above are dealer
preprogrammed. See your dealer for
more details.
Decoding an Emergency Alarm
If preprogrammed by your dealer, and provided
the signaling protocol supports it, your radio
decodes (responds to) an Emergency Alarm or
Emergency Call by:
•
Sounding a unique, repeating alert tone
•
Activating an external alarm
•
Displaying alternating message parts on a
single line, similar to the following example
E
E m e r g e n c y
21
English