Motorola CLS1410 사용자 설명서 - 페이지 15

{카테고리_이름} Motorola CLS1410에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola CLS1410 30 페이지. Cls series two-way radio
Motorola CLS1410에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지)

페이지 인쇄

Factory Default Settings

Your radio is programmed at the factory to the following settings:

CLS1110

Channel

Not available

Code

Call Tone/

VibraCall

Not available

VOX

Microphone

Gain

To restore the factory settings, turn the radio on while holding Push to Talk and

for 3 seconds.

Entering Programming Mode

Press and hold Push to Talk and

radio beeps and displays k, the channel number flashes, and the frequency

(indicated by l) and code (indicated by y) display alternately.

Note: If you press and release the Push to Talk button when programming

CSL1410 models, you will return to the front of the Programming Mode.

Selecting a Channel (CLS1410 Only)

1. In programming mode, press

and the frequency and code display alternately (this is the first

setting after you enter programming mode).

2. Press [ or ] to select the channel.

3. Press and hold Push to Talk to exit programming mode, or

press

to continue programming.

Programming the Frequency

1. In programming mode, press

frequency number flashes.

2. Press [ or ] to select the frequency.

3. Press and hold Push to Talk to exit programming mode, or

press

to continue programming.

Note: See page 39 for information on frequencies for communicating with other

business radios. If you are matching your _ Series radio to an existing Spirit GT

radio, see page 45.

Frequency

CLS1410

Off (0)

2 (medium sensitivity)

for 3 seconds while turning the radio on. The

until the channel number flashes

until l displays and the