Motorola GP360 Series 기본 사용 설명서 - 페이지 11
{카테고리_이름} Motorola GP360 Series에 대한 기본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GP360 Series 18 페이지. Professional radio, power distribution and controller
Motorola GP360 Series에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 운영 지침 (4 페이지), 서비스 정보 (32 페이지), 서비스 정보 (30 페이지), 서비스 정보 (30 페이지)
페이지 인쇄
GETTING STARTED
Radio On-Off/Volume Control
To turn the radio on, turn the On-Off/Volume Control
knob clockwise. To turn the radio off, turn the
On-Off/Volume Control knob counterclockwise until
you hear a click.
At power up the radio will display a message
customised by your dealer,:
Radio On
After this text has been displayed, the radio perform
a self test routine. On completion of a successful
self test the radio will display:
Channel Number
This may be a number or an alias and will be the
channel currently selected by the rotary channel
selector. Alternatively, if required the radio may
display a message customised by your dealer. e.g.
Ready
Selecting a Radio Channel
Turn the channel selector rotary knob clockwise or
counterclockwise until you reach the desired
channel indicated on the display.
8
English
Sending a Call
1.
Select the desired channel.
2.
Press the PTT button and speak clearly into the
microphone.
Your mouth should be 2.5 to 5 cm away from
the microphone.
3.
Release the PTT button when you finish
speaking.
Note:The system may have a limited call time and
the call may be terminated automatically if this
call time is exceeded.
Receiving a Call
1.
Turn your radio on and adjust the volume level.
2.
Switch to the desired channel.
3.
If, at any time, a call is received you will hear
the call at the volume level you have set.
Cancelling/Ending a Call
To terminate a call at any time press the Monitor/
Call Cancel button. Always end a call by pressing
the Monitor/Call Cancel button.