Motorola GP360 Series Basic User's Manual - Page 11

Browse online or download pdf Basic User's Manual for Two-Way Radio Motorola GP360 Series. Motorola GP360 Series 18 pages. Professional radio, power distribution and controller
Also for Motorola GP360 Series: Specification Sheet (2 pages), Operating Instructions (4 pages), Service Information (32 pages), Service Information (30 pages), Service Information (30 pages)

Print Page

GETTING STARTED

To turn the radio on, turn the On-Off/Volume Control

knob clockwise. To turn the radio off, turn the

On-Off/Volume Control knob counterclockwise until

you hear a click.

At power up the radio will display a message

customised by your dealer,:

Radio On

After this text has been displayed, the radio perform

a self test routine. On completion of a successful

self test the radio will display:

Channel Number

This may be a number or an alias and will be the

channel currently selected by the rotary channel

selector. Alternatively, if required the radio may

display a message customised by your dealer. e.g.

Ready

Turn the channel selector rotary knob clockwise or

counterclockwise until you reach the desired

channel indicated on the display.

English

Select the desired channel.

Press the PTT button and speak clearly into the

microphone.

Your mouth should be 2.5 to 5 cm away from

the microphone.

Release the PTT button when you finish

speaking.

Note:The system may have a limited call time and

the call may be terminated automatically if this

call time is exceeded.

Turn your radio on and adjust the volume level.

Switch to the desired channel.

If, at any time, a call is received you will hear

the call at the volume level you have set.

Cancelling/Ending a Call

To terminate a call at any time press the Monitor/

Call Cancel button. Always end a call by pressing

the Monitor/Call Cancel button.