Epson Equity 386SX PLUS 제품 지원 게시판 - 페이지 14
{카테고리_이름} Epson Equity 386SX PLUS에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Equity 386SX PLUS 26 페이지. Product support bulletin(s)
Epson Equity 386SX PLUS에 대해서도 마찬가지입니다: 제품 지원 게시판 (19 페이지), 제품 정보 매뉴얼 (10 페이지), 제품 정보 매뉴얼 (10 페이지), 제품 지원 게시판 (45 페이지)
페이지 인쇄
Q17. Are the wait states user selectable?
A.
No, the 386SX PLUS automatically inserts them when needed after the
command phase of the processor clock cycle.
Q18. How many jumpers are on the system board?
A.
There are six (6) jumpers on the system board:
System Board:
Jumper 1: Password security enable/disable.
A: Disabled
Jumper 2: Onboard HDD interface enable/disable.
A: Enabled
Jumper 3: internal Mouse port IRQ12.
Jumper 4: Monitor type color/monochrome.
A: Color monitor
Jumper 5: Auto IOCHRDY enable/disable.
A: Disabled
Jumper 6: Onboard video enable/disable.
A: Enabled
NOTE: J6 is not present on early production units.
HARD DISK DRIVES:
Q19. What kind of hard disk drives are available for the 386SX PLUS?
A.
As a factory configuration, the 386SX PLUS is available with a 40MB, 3.5" hard
disk (Conner CP-3044,27ms access time). This HDD offers a 1:1 interleave
and uses an embedded controller with an IDE interface. When installing the
40MB drive, use type 17. A 100MB option kit is also available.
B: Enabled
B: Disabled
A: Assigned to on board mouse port
B: IRQ12 assigned to bus expansion slot
B: Mono monitor
B: Enabled
B: Disabled
PSB No: S-0131
Page: 5 of 9