Epson Equity 386SX PLUS 제품 지원 게시판 - 페이지 6
{카테고리_이름} Epson Equity 386SX PLUS에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Equity 386SX PLUS 26 페이지. Product support bulletin(s)
Epson Equity 386SX PLUS에 대해서도 마찬가지입니다: 제품 지원 게시판 (19 페이지), 제품 정보 매뉴얼 (10 페이지), 제품 정보 매뉴얼 (10 페이지), 제품 지원 게시판 (45 페이지)
페이지 인쇄
EPSON AMERICA, INC.
Product Support Bulletin
Subject: Introducing the Equity 386SX PLUS Diskless Workstation
Date: 8/7/91
Page(s): 1 of 4
INTRODUCTION
This system has been designed to be a diskless workstation node on a local area
network. There are no disk drives supplied with this model. Cables are included to
install floppy drives and/or hard drives as the need arises. Standard procedures for
installing a diskless workstation are used and can be found in your network
installation documentation.
The user's manual is the same as the one supplied with the standard Equity 386SX
PLUS, and contains a user's guide update "slip-sheer that describes the
differences between the standard and the diskless models.
Differences between the standard model and the diskless model are summarized
as follows:
Does not include disk drives, DOS, video drivers or other software.
Includes drive cables for installing optional drives.
Setup utility is modified and is contained in ROM. New options include
extended memory and boot control.
User or Administrator mode is set by jumper J1 on the main board. The
control of this mode along with the system key lock protect the system
configuration resulting in added security.
Only supplied in a 1 MB configuration. Use instructions in the user's
manual that pertain to the 1 MB model only.
IDENTIFICATION
Both the standard and diskless models have the same logo plate on the front of the
CPU; "Equity 386SX PLUS". The "CODE" number can be used to identify the
diskless model, and is located on or near the serial number label attached to back
of the CPU:
CODE: A038590
PSB No: S-0133
Originator: APA
EPSON