Epson Equity 386SX PLUS Product ondersteunings bulletin - Pagina 6

Blader online of download pdf Product ondersteunings bulletin voor {categorie_naam} Epson Equity 386SX PLUS. Epson Equity 386SX PLUS 26 pagina's. Product support bulletin(s)
Ook voor Epson Equity 386SX PLUS: Product ondersteunings bulletin (19 pagina's), Handleiding productinformatie (10 pagina's), Handleiding productinformatie (10 pagina's), Product ondersteunings bulletin (45 pagina's)

EPSON AMERICA, INC.

Product Support Bulletin

Subject: Introducing the Equity 386SX PLUS Diskless Workstation

Date: 8/7/91

Page(s): 1 of 4

INTRODUCTION

This system has been designed to be a diskless workstation node on a local area

network. There are no disk drives supplied with this model. Cables are included to

install floppy drives and/or hard drives as the need arises. Standard procedures for

installing a diskless workstation are used and can be found in your network

installation documentation.

The user's manual is the same as the one supplied with the standard Equity 386SX

PLUS, and contains a user's guide update "slip-sheer that describes the

differences between the standard and the diskless models.

Differences between the standard model and the diskless model are summarized

as follows:

Does not include disk drives, DOS, video drivers or other software.

Includes drive cables for installing optional drives.

Setup utility is modified and is contained in ROM. New options include

extended memory and boot control.

User or Administrator mode is set by jumper J1 on the main board. The

control of this mode along with the system key lock protect the system

configuration resulting in added security.

Only supplied in a 1 MB configuration. Use instructions in the user's

manual that pertain to the 1 MB model only.

IDENTIFICATION

Both the standard and diskless models have the same logo plate on the front of the

CPU; "Equity 386SX PLUS". The "CODE" number can be used to identify the

diskless model, and is located on or near the serial number label attached to back

of the CPU:

CODE: A038590

PSB No: S-0133

Originator: APA

EPSON