Motorola BLISS54-2 사용자 설명서 - 페이지 16

{카테고리_이름} Motorola BLISS54-2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola BLISS54-2 30 페이지. 4.3" video baby monitor
Motorola BLISS54-2에 대해서도 마찬가지입니다: 사용자 설명서 (30 페이지)

페이지 인쇄

4.3.5

Set temperature format

The temperature reading from the temperature sensor at the back of the

Baby Unit will be displayed at the top of the Parent Unit LCD screen. You

can switch temperature format between Centigrade and Fahrenheit as

follows:

1. Press the M MENU button when the Parent Unit is in camera viewing mode.

2. Press the < LEFT/> RIGH button to select

3. Press the + UP /- DOWN button to select

4. Confirm with the OK button.

4.3.6

Add camera

You can connect one Parent Unit with up to four Baby Units(cameras).

To add a compatible camera to the Parent Unit, proceed as follows:

1. Press the M MENU button when the Parent Unit is in camera viewing mode.

2. Press the < LEFT/> RIGHT button to select add camera icon

3. Press the + UP /- DOWN button to select a number and confirm with the

OK button. The sound level indicator will flash in green rapidly while the

parent unit searches for a camera.

4. Hold down the PAIR button on the rear of the camera until an acoustic

signal is heard and the transmission image from the camera that has been

added appears on the screen.

4.3.7

Delete camera

If you wish to delete the connection to a camera, proceed as follows:

1. Press the M MENU button when the Parent Unit is in camera viewing mode.

2. Press the < LEFT/> RIGHT button to select delete camera icon

3. Press the + UP /- DOWN button to select the number of the camera that

you wish to delete.

4. Confirm with the OK button.

5. Press - DOWN button to select [X], and then OK to confirm delete.

Note: you cannot delete a camera if it is the only unit paired to the Parent

Unit.

6. Press the M MENU button to return to the main screen.

appears on the screen.

, press the OK button

C or

Parent Unit Menu Options