Motorola MBP26 사용자 설명서 - 페이지 10

{카테고리_이름} Motorola MBP26에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola MBP26 27 페이지. Digital video baby monitor
Motorola MBP26에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (27 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)

4. If there is no connection or you are out of range, the video display

will go off and the symbol

the unit will beep every 9 seconds. (If the unit is on scan

1 ?

the

symbol displays.) Move the parent unit closer to the baby

until the link is re-established.

5. Press and hold the

bar scrolls fully across , to turn OFF the parent unit.

NOTE

The battery icon

is low, and it gives a beep every 16 seconds. The battery needs to be

recharged. battery pack takes about 16 hours to charge fully.

When charging

If the parent unit is turned OFF, when the adapter is plugged in, it

displays a "mains plug" icon briefly, then a large battery icon with

internal segments cycling for 60 seconds, before the display goes

blank, but the unit continues to charge. The Blue LED at top left

corner lights up to indicate adapter is plugged in.

If the parent unit is turned ON, when the adapter is plugged in, the

battery icon in the screen's top right corner will show that the battery

is charging by cycling the internal segments. The segments stop

cycling when the battery is fully charge. The Blue LED at top left

corner lights up to indicate adapter is plugged in.

Getting Started

POWER ON/OFF button, until the progress

turns RED and flashes to indicate that the battery

will flash on the LCD display, and

Getting Started