Motorola APX 4000 매뉴얼 - 페이지 18

{카테고리_이름} Motorola APX 4000에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola APX 4000 25 페이지.

CHANGING THE ZONE & TALKGROUP:

ZnDn Zone ZnUp

HOME

BUTTON

4-WAY NAVIGATION BUTTON

To change the zone, look at the display. If the "ZnDn" "Zone"

and "ZnUp" does not appear in the menu selections on the

bottom of the display either use the navigation buttons

to scroll until they appear or simply hit the Home button.

SELECT

Once the word "Zone" appears in the menu, press the

KEYS

corresponding menu select button directly underneath of

where it appears on the display. In the example to the left,

FUTURE

the zone menu is accessed by pressing the center menu

USE

select button ( which has two small dots ).

BUTTON

Once the zone menu is accessed, the display should appear

similar to the example to the left. The currently selected

zone is highlighted in light blue on your display. To scroll

up and down through the various zones, use the up and

down arrows on the 4-way navigation button . As you

move up and down through the zones, the area highlighted

in light blue moves correspondingly, showing you what

particular zone you currently have selected.

For example, if you need to use a talk-group located within

Zone A of your radio, you would move the navigation button

until Zone A was highlighted in light blue on my screen ( as

shown) . Once Zone A is highlighted, you would press the

menu select button corresponding to "Sel" as shown in the

bottom left of the example. This selects Zone A, and you

will automatically exit the zone selection menu. The radio's

main display screen is then shown. You can also use the

ZnDn and ZnUp functions to scroll through the Zones.

Once you have selected the zone you want, use the mode

knob on the top of the portable radio to locate the

Talk-group you wish to tune to.

Each zone is capable of holding up to 16 talk-groups. While

many zones will contain the full amount, some may not.

If your display reads " Unprogrammed " and the radio

begins to tone, simply rotate the mode knob

counter - clockwise until you begin to see talk-groups.