Motorola APX 4000 Посібник - Сторінка 18
Переглянути онлайн або завантажити pdf Посібник для Радіо Motorola APX 4000. Motorola APX 4000 25 сторінок.
![Motorola APX 4000 Посібник](/uploads/products/server2/6108547/6108547.png)
CHANGING THE ZONE & TALKGROUP:
ZnDn Zone ZnUp
HOME
BUTTON
4-WAY NAVIGATION BUTTON
To change the zone, look at the display. If the "ZnDn" "Zone"
and "ZnUp" does not appear in the menu selections on the
bottom of the display either use the navigation buttons
MENU
to scroll until they appear or simply hit the Home button.
SELECT
Once the word "Zone" appears in the menu, press the
KEYS
corresponding menu select button directly underneath of
where it appears on the display. In the example to the left,
FUTURE
the zone menu is accessed by pressing the center menu
USE
select button ( which has two small dots ).
BUTTON
Once the zone menu is accessed, the display should appear
similar to the example to the left. The currently selected
zone is highlighted in light blue on your display. To scroll
up and down through the various zones, use the up and
down arrows on the 4-way navigation button . As you
move up and down through the zones, the area highlighted
in light blue moves correspondingly, showing you what
particular zone you currently have selected.
For example, if you need to use a talk-group located within
Zone A of your radio, you would move the navigation button
until Zone A was highlighted in light blue on my screen ( as
shown) . Once Zone A is highlighted, you would press the
menu select button corresponding to "Sel" as shown in the
bottom left of the example. This selects Zone A, and you
will automatically exit the zone selection menu. The radio's
main display screen is then shown. You can also use the
ZnDn and ZnUp functions to scroll through the Zones.
Once you have selected the zone you want, use the mode
knob on the top of the portable radio to locate the
Talk-group you wish to tune to.
Each zone is capable of holding up to 16 talk-groups. While
many zones will contain the full amount, some may not.
If your display reads " Unprogrammed " and the radio
begins to tone, simply rotate the mode knob
counter - clockwise until you begin to see talk-groups.