Motorola MWR815 사용자 설명서 - 페이지 5
{카테고리_이름} Motorola MWR815에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola MWR815 11 페이지. Weather alert radio
페이지 인쇄4. Press
or
to change the minutes.
5. Press
to confirm your selection.
Setting the Date
1. Press
until SET DATE appears.
2. Press
or
to change the month.
3. Press
to confirm your selection. The cursor will jump to the day.
4. Press
or
to to change the day.
5. Press
to confirm your selection. The cursor will jump to the year.
6. Press
or
to change the year.
7. Press
to confirm your selection.
WEATHER ALERT
SAME Weather Alerts
NOAA/EC transmit coded weather and civil emergency alerts using the Specific
Area Message Encoding (SAME) technology. SAME enables you to customize the
weather alert radio to receive only the messages relevant to your geographic area.
By programming your geographic location (State, Province, Territory, County,
Parish, or geographic division) into the radio, you minimize undesired alerts.
How the Weather Alert Works
In the event that a weather alert is released for your set location (s), the
following will occur:
7
1. The radio's weather alert siren will sound.
2. The LCD backlight will flash red for Warnings, Orange for Watches and
Yellow for Advisories.
3. The County/Parish/Province and city will scroll across the screen.
4. The expiration time and date will scroll across the screen.
5. The above will cycle continuously until the EVENT expires. The radio will
then default to the "current time" screen against a blue backlight.
The default setting is to receive alerts for any and all locations. The asterisk is used
to indicate the current setting.
Alert Enable
The weather alert feature is enabled by default. Disabling this feature will
prevent you from receiving important weather alerts. We recommend that you
do not disable this feature.
1. Press
to turn on the weather receiver.
2. Press
ALERT ENABLED will be displayed and the
will appear.
3. Press
or
to disable SAME alerts and the
will disappear.
4. Press
to confirm your selection.
Model: MWR815
Setting the Weather Alert Location
The weather alert radio is pre-programmed with over 4000 USA and Canadian
geographic locations as well as the 6 digit SAME (USA)/CLC (Canada) codes.
For USA locations, the radio has also been pre-programmed with the appropriate
weather radio channel frequency for simple configuration.
You can program the radio to receive alerts from single or multiple locations.
The options will appear in the following order:
• State, Province or Territory
• County, Parish or geographic division
1.
Press
to turn on the weather receiver.
2. Press
until SET LOCATION appears.
3. To select single or multiple locations, press
or
.
or
or
or
or
Model: MWR815
or
4. Press
to confirm your selection.
Note: Multiple locations must be selected within the coverage area of a single
Weather Radio transmitter site. The 1st location selected will determine the
weather radio transmitter to be monitored for alert signals. The subsequent
location selections will be limited to the locations covered by that same
weather radio transmitter site.
5. Press
or
to scroll through State, Province
or Territory.
6. Press
to confirm your selection.
7. Press
or
to scroll through county /
parish / city names of the selected state / province.
8. Press
to confirm your selection.
9. The selected location's SAME/CLC code will appear.
8