Motorola MWR815 사용자 설명서 - 페이지 7
{카테고리_이름} Motorola MWR815에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola MWR815 11 페이지. Weather alert radio
페이지 인쇄Weekly Test Messages are transmitted from all NOAA/EC weather radio.
Success in receiving these test messages every 7 days is measured by the
weather alert radio. If 10 days elapse without receiving the test message (or
any other type of SAME encoded alerts), the weather radio signal is no longer
being received effectively.
If you receive this error message, turn on the receiver. Check the weather
signal level display for 2 or more bars. Reposition the radio in the room, or
reorient the antenna as necessary to achieve good reception. Check to be
sure the LOCATION settings are correct, and the correct Weather Channel
frequency is being used.
Review any stored messages, noting the dates. Once you have checked the
receiver, the 10 day timer will reset. If the radio is properly configured, you
should not see an error message.
Weather Alert History
The weather alert radio will store up to 10 alert messages in its memory. When
there are 10 old messages stored and a new message is received, the oldest
message will be removed. When the receiver is initially powered on, or reset
to factory defaults, NO ALERT will be displayed. If messages are stored,
the respective alert will be displayed with the corresponding color coded
backlight color.
1. Press
or
to view stored alerts when the radio's clock
time is displayed. To display the radio's clock time, toggle WX. If there
is no alert, the following message will flash on the screen.
If messages are stored, the respective alert will be displayed.
11
OTHER MENU OPTIONS
Setting the Alarm to Radio or Chime
1. Press
until WAKE TO CHIME flashes.
2. Press
or
. CHIME or RADIO will flash.
3. Press
to confirm your selection.
Setting the Backlight
1. Press
until BACKLIGHT appears. There are 6 backlight levels. The
backlight setting will flash.
2. Press
or
to select an alternate backlight level.
3. Press
to confirm your selection.
Setting the Contrast
1. Press
until the CONTRAST menu appears. There are 3 CONTRAST
levels. The default contrast setting (CONTRAST 2) will flash.
2. Press
or
to select an alternate contrast
level.
3. Press
to confirm your selection.
Setting the Key Beep
1. Press
until KEY BEEP ON appears. The default setting is ON.
Model: MWR815
2. Press
or
to toggle ON or OFF.
3. Press
to confirm your selection.
Adjusting the Siren Volume
The weather alert radio has 2 volume levels for the siren heard when a weather
alert message is received.
1. Press
until the SIREN LOW flashes. The default setting is HIGH.
2. Press
or
toggle through LOW and HIGH.
3. Press
to confirm your selection.
ALARM CLOCK
Setting the Alarm Clock
The weather alert radio has 2 alarm times as well as a snooze function to control
the alarm clock. The alarm sound can be set to RADIO or CHIME. The default
alarm time is 6:00 AM for both alarms.
Model: MWR815
Enable/Disable the Alarms
You can enable one or both alarm times. The alarm is disabled when no alarm
icons appear. The default setting is OFF.
1.
Press
until
or
or
appears:
2. Press
to disable.
Setting Alarm 1 or Alarm 2
1. Press
to select alarm 1 or 2.
2. Hold down
for 3 secs. A beep will sound and
or
the hour will flash.
3. Press
or
to change the hour.
4. Press
and the minutes will flash.
5. Press
or
to change the minutes.
6. Press
to exit the alarm setting process or it will
automatically exit after 5 seconds.
Snooze Function
The alarm will sound for 54 minutes unless stopped by pressing
or snoozed for 9 minutes by pressing
.
1. When the alarm is sounding, the alarm icon
will blink.
2.
will appear while the alarm is silenced by the SNOOZE function.
3. The radio or chime volume is set by the volume level.
and
12