Motorola CP185 Series 사용자 설명서 - 페이지 16
{카테고리_이름} Motorola CP185 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola CP185 Series 40 페이지.
Motorola CP185 Series에 대해서도 마찬가지입니다: 사용자 설명서 (42 페이지), 일반 사양 (2 페이지)
Charging the Battery
1.
Make sure the radio is OFF.
2.
Plug the power supply into an electric outlet.
3.
Connect the power supply output cord connector into
the rear of the Desktop Charging Tray.
4.
The LED on the charger blinks green once to indicate
charger is turned ON.
10
English
CP185
5.
Turn the radio OFF before charging the battery. Insert
a battery, or a radio with a battery into the charger's
pocket by:
aligning the groove on each side of the battery
with the corresponding raised rail on each side of
the charger pocket
OR
pressing the battery towards the rear of the
pocket
OR
sliding the battery into the charger pocket,
ensuring complete contact between the charger
and battery contacts.
6.
The charger's LED color will indicate the battery
charging status. (See "Charging Status" on page 11).
Refer to picture below for the battery insert visual guide line.
Battery insert visual guide line
Battery Charging Tray