Motorola MCS 2000 III 사용자 설명서 - 페이지 10

{카테고리_이름} Motorola MCS 2000 III에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola MCS 2000 III 20 페이지.

페이지 인쇄

MCS 2000 Models II & III

When the ID has been selected in one of the two ways

described above, the private call may be transmitted

to the displayed ID by pressing the PTT (F).

Enhanced Private Call

If an Enhanced Private Call is not answered within 20

seconds the display changes into

model III

NO ANSWER

ID: 700001

Press the PTT (F) to leave your ID with the called radio

so that you will be called back later. The call alert sent

tone will sound.

Caller ID

The radio will momentarily display the ID or alias name

of the radio that initiated a call. If an emergency call is

received in trunked operation, the radio will alternate

the display between the talkgroup, the emergency

received display and the ID (or alias name) of the radio

that initiated the emergency call.

Mode Preset Buttons

Mode preset buttons will allow quick access to com-

monly used modes. Press and hold a mode preset but-

ton until a good-key tone is heard to program the

model II

NO ANSWER

button for the currently selected mode. A short press of

a mode preset button will cause the radio to immedi-

ately change to the mode programmed for that button.

Mode Recall

The radio will always remember the last mode

selected. Pressing mode recall will cause the radio to

switch to the previously selected mode.

Automatic Power-Off

"Automatic power off" will power off your radio when

no user actions occur during a pre-programmed

length of time. A user action is deﬁned as the press of

a button, turn of a knob or the use of any radio acces-

sory (e.g. footswitch).

2 minutes prior to automatic power-off, the radio will

generate a continuous low tone and

AUTO POWER OFF

will ﬂash on the display. Any user action will immedi-

ately cause the radio to cease the automatic power-

off tones and display and return the radio to normal

operation.

page 10

68P81083C49-B