Motorola MCS 2000 III Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Motorola MCS 2000 III. Motorola MCS 2000 III 20 pagina's.
Pagina afdrukkenMCS 2000 Models II & III
When the ID has been selected in one of the two ways
described above, the private call may be transmitted
to the displayed ID by pressing the PTT (F).
Enhanced Private Call
If an Enhanced Private Call is not answered within 20
seconds the display changes into
model III
NO ANSWER
ID: 700001
Press the PTT (F) to leave your ID with the called radio
so that you will be called back later. The call alert sent
tone will sound.
Caller ID
The radio will momentarily display the ID or alias name
of the radio that initiated a call. If an emergency call is
received in trunked operation, the radio will alternate
the display between the talkgroup, the emergency
received display and the ID (or alias name) of the radio
that initiated the emergency call.
Mode Preset Buttons
Mode preset buttons will allow quick access to com-
monly used modes. Press and hold a mode preset but-
ton until a good-key tone is heard to program the
model II
NO ANSWER
button for the currently selected mode. A short press of
a mode preset button will cause the radio to immedi-
ately change to the mode programmed for that button.
Mode Recall
The radio will always remember the last mode
selected. Pressing mode recall will cause the radio to
switch to the previously selected mode.
Automatic Power-Off
"Automatic power off" will power off your radio when
no user actions occur during a pre-programmed
length of time. A user action is defined as the press of
a button, turn of a knob or the use of any radio acces-
sory (e.g. footswitch).
2 minutes prior to automatic power-off, the radio will
generate a continuous low tone and
AUTO POWER OFF
will flash on the display. Any user action will immedi-
ately cause the radio to cease the automatic power-
off tones and display and return the radio to normal
operation.
page 10
68P81083C49-B