Epson LW-K400 사용자 설명서 - 페이지 7
{카테고리_이름} Epson LW-K400에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson LW-K400 10 페이지.
Epson LW-K400에 대해서도 마찬가지입니다: 설정 매뉴얼 (2 페이지)
페이지 인쇄
LW-K400
User's Guide
Creating a ribbon
J
1. Press
.
2. Select "8.Ribbon" using the cursor keys, then press
3. Select a value using the cursor keys or enter the value using the
numeric keys, then press
Range of ribbon length: 20-40 cm
4. Enter text for printing on both ends of the ribbon.
5. Press
.
Creating a label including a barcode
J
• Enter barcodes according to their standards.
• Check the printed labels with your barcode reader to ensure they can be
correctly read.
• Supported barcode: CODE39, CODE128, ITF, CODABAR, UPC-A, UPC-E, EAN-8,
EAN-13
1. Press
+
.
2. Select an item with
3. After setting the barcode, enter the code.
.
.
, and press
.
Display Settings ("Display" menu)
The following are the settings to make operation easier.
Backlight
Turns the backlight of the display on or off.
Backlight: On/Off
Contrast
Adjusts the density of the fonts on the display.
Value: -5 to +5
Language
Selects the language of the settings and messages on the display.
Language: English/Spanish/French/Portuguese-Br/Portuguese-EU/
Italian/Dutch/German
inch:cm
Selects the unit to indicate the length.
Value: inch/cm
Procedure
1. Press
+
.
2. Select a setting item with
3. When the options of the selected item appear, select your choice
with
, and press
Cleaning
When the exterior is dirty
Wipe the dirt off with a soft cloth. If it is very dirty, use a cloth wrung
out of water.
Never use chemicals or solvents such as benzine, thinner, or
c
alcohol, or use a chemical duster.
When the printhead is dirty
If the print becomes faint or some parts are missing, there may be some
dirt on the printhead.
Clean the print head with a cotton swab moistened with medical
alcohol (commercially available ethanol).
Initialising this product
The product may stop functioning due to static electricity or other
causes.
Initialise the product if it does not operate normally such as the display
is interrupted.
Initialise the product. Take extreme care before initialising it.
c
All the created text will be deleted. The settings you made for
character input will return to the default.
1. Press
.
2. Press and hold
+
, and press
3. When a message appears, press
The product will be initialised.
To abort: Press any button other than
, and press
.
.
.
.
.
7