Motorola TLKR T7 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Motorola TLKR T7에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola TLKR T7 20 페이지.
Motorola TLKR T7에 대해서도 마찬가지입니다: 소유자 매뉴얼 (28 페이지)

페이지 인쇄

UT035AH EN.fm Page 6 Thursday, June 26, 2008 12:45 PM

Charging the battery

You can charge the NiMH battery pack itself using the

included battery support bracket.

1. Place the battery support bracket into the charging cra-

dle.

2. Install the NiMH battery pack applying its charging

contacts to those of charging cradle. Installing the battery

pack incorrectly will prevent the battery pack from

charging.

3. Make sure that the LED illuminates. Charge the battery

pack for 16 hours.

The charge indicator LEDs will remain on as long

Note:

as the battery is left in the charger.

Using the Radio

In order to get the most out of your new radio, read this ref-

erence guide completely before attempting to operate the

unit.

Turning the Radio On and Adjusting the Volume

1. Turn the rotary knob to clockwise to turn the radio ON,

and increase the volume by turning the rotary knob.

To decrease the volume, turn the rotary knob to counter

clockwise.

2. Turn the rotary knob to the end of counterclockwise to

turn the radio OFF.

Adjusting the Sound (Key Beeps)

Your radio emits a beep each time one of the keys (except

for the PTT and

key) is pressed.

To switch this sound OFF or ON, press and hold the

while turning the radio ON.

Roger Beep

Roger Beep is a BEEP that is sent to notify the end of

transmission (PTT and VOX transmission). Roger Beep

can be heard through the speaker when Key Beep is on. It

is transmitted even if Key Beep is turned off. However,

Roger Beep will not be heard from the speaker.

To turn Roger Beep OFF or ON:

Press and hold the

key while turning the radio ON.

Talking on Your Radio

To talk to others using the radio:

1. Press and hold the PTT key and speak in a clear, normal

voice about 5-8 cms away from the microphone. While

you are transmitting, the

icon will appear on the

display. To avoid cutting off the first part of your

transmission, pause slightly after pressing the PTT

button before you start talking.

2. When you have finished speaking, release the PTT key.

You can now receive incoming calls. While receiving, the

icon will appear on the display.

When you continue to transmit for 60 seconds, the

Note:

radio emits TX Time Out tone and the

The radio will stop transmitting.

key

icon flashes.