Motorola H390 - Headset - In-ear ear-bud 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Motorola H390 - Headset - In-ear ear-bud에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola H390 - Headset - In-ear ear-bud 32 페이지. User manual
Motorola H390 - Headset - In-ear ear-bud에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지), 모토매뉴얼 (15 페이지), (프랑스어) 매뉴얼 드 데마라주 라피드 (6 페이지)

페이지 인쇄

Motorola H390 - Headset - In-ear ear-bud 빠른 시작 매뉴얼

TURNING HEADSET

Features and

ON AND OFF

Functions Guide

To turn your headset on, slide the switch

toward the microphone. The indicator light

flashes blue three times, then flashes in

H390

blue and purple (if connected with a device)

Bluetooth®

or is steadily blue (if ready to be paired).

Handsfree Headset

To turn your headset off, slide the switch

toward the charging plug. The indicator light

flashes three times then turns off.

IMPORTANT:

Be sure to first follow the

Quick Start Guide

on the reverse side

of this guide

to complete initial setup

Indicator

of your H390.

Light

QUICK BATTERY CHECK

European Union Directives

When not on a call, you can check your

Conformance Statement

headset's battery charge level by pressing and

holding both Volume buttons.

Hereby, Motorola declares that

this product is in compliance with:

The indicator light displays charge status for 5

• The essential requirements and

seconds. See below for details on indicator light

other relevant provisions of Directive

and charge status.

1999/5/EC.

• All other relevant EU Directives.

Headset Indicator

Red

Yellow

Product

Green

Approval

Number

To save battery power, turn OFF the headset

The above gives an example of a typical Product

when you don't use it for an extended time by

Approval Number.

sliding the switch towards the charging plug.

You can view your product's Declaration of Conformity

(DoC) to Directive 1999/5/EC (to R&TTE Directive) at

www.motorola.com/rtte. To find your DoC, enter the

product Approval Number from your product's label in

the "Search" bar on the web site.

EARBUDS AND YOUR

HEADSET

Your H390 headset is supplied with multiple

earbuds. The earbud is fitted onto the end of

your headset's earpiece speaker, and placed

onto your ear when using your headset.

Your headset's performance is greatly

dependent upon achieving a good fit on your

ear. Therefore, we recommend trying all the

supplied earbuds with your headset.

Power Button

MAKING CALLS

Function

Action

Receive a call

Tap the Call button

Mute or unmute a call

Tap both Volume

buttons

Reject a call

Press and hold a

Volume button until

the ringer stops

End a call

Tap the Call button

Talk Time

Redial last call

Press and hold the

Less than 2 hours

Call button until you

Between 2 to 5 hours

hear two tones

Up to 7 hours

Make a voice dial call

Tap the Call button

and wait for voice

prompt

Answer second incoming Use phone to answer

call

(follow your phone's

instructions)

Note: Your H390 supports both Handsfree and Headset

Profiles. Accessing call functions depends upon which

profile your phone supports. See your phone's user's guide

for more information.

Note: Some features are phone/network dependent.

WEARING THE

CHANGING FOR USE

ON OTHER EAR

HEADSET

You can wear your H390 headset on your left or

To wear your headset, flex the earhook and

right ear. The headset comes ready for the right

loop it over your ear as shown.

ear. To change the headset for the left ear:

Gently lift and pull the

top of the earhook up

and off speaker stem, as

shown.

Flip the headset over.

Attach the earhook to

the speaker stem, as

shown.

Be sure to position the ear cushion into your

ear canal for optimal audio performance and

comfort.

INDICATOR LIGHT

With No Charger Plugged In

With the Charger Plugged In

Headset Indicator

Headset Status

Off

Red

Charging (battery

level less than 70%

Three blue flashes

charge)

Steady blue

Yellow

Charging (battery

Rapid blue/purple flashes Connection successful

level more than 70%

charge)

Quick blue flash

Green

Charging complete

Slow blue pulse

Slow blue flash

Slow red flash

Slow purple pulse

Steady red

Quick red flash

Note: After 20 minutes on a call or of inactivity, the light stops

flashing to conserve power, but the headset remains on.

CHANGING VOLUME

BUTTON ORIENTATION

You can also change the orientation of the

volume buttons on your headset.

Turn the headset power off.

Press and hold the Volume button you

want to assign as the "volume up" button

and slide the switch toward the

microphone. The indicator light flashes

blue three times, then steady blue. When

connected, it will flash blue/purple.

Volume Buttons

Power Button

AUDIO TONES

Audio Tone

Headset Status

Ascending tone

Powering on

Power off

Two descending

Powering off

Powering on/off

tones

Pairing/connect mode

Ring tone

Incoming call

Two short tones when

Volume at minimum

pressing Volume button

or maximum

Incoming/outgoing call

High/low tones

Low battery

Connected (on a call)

repeated every 60 sec.

Standby (not on a call)

No audio indications;

Out of range

Idle (not connected

deteriorating quality

to phone)

Two ascending tones

Connected to phone

Connected call muted

Two rapid ascending

Mute enabled

Attempting to connect

tones

Low battery

Two rapid descending

Mute disabled

tones

Low tone every

Mute reminder

10 seconds