Motorola H390 - Headset - In-ear ear-bud Quick Start Manual - Page 2
Browse online or download pdf Quick Start Manual for Headsets Motorola H390 - Headset - In-ear ear-bud. Motorola H390 - Headset - In-ear ear-bud 32 pages. User manual
Also for Motorola H390 - Headset - In-ear ear-bud: Quick Start Manual (6 pages), Motomanual (15 pages), (French) Manual De Démarrage Rapide (6 pages)
![Motorola H390 - Headset - In-ear ear-bud Quick Start Manual](/uploads/products/server2/6117269/6117269.png)
TURNING HEADSET
Features and
ON AND OFF
Functions Guide
To turn your headset on, slide the switch
toward the microphone. The indicator light
flashes blue three times, then flashes in
H390
blue and purple (if connected with a device)
Bluetooth®
or is steadily blue (if ready to be paired).
Handsfree Headset
To turn your headset off, slide the switch
toward the charging plug. The indicator light
flashes three times then turns off.
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
Indicator
of your H390.
Light
QUICK BATTERY CHECK
European Union Directives
When not on a call, you can check your
Conformance Statement
headset's battery charge level by pressing and
holding both Volume buttons.
Hereby, Motorola declares that
this product is in compliance with:
The indicator light displays charge status for 5
• The essential requirements and
seconds. See below for details on indicator light
other relevant provisions of Directive
and charge status.
1999/5/EC.
• All other relevant EU Directives.
Headset Indicator
Red
Yellow
Product
Green
Approval
Number
To save battery power, turn OFF the headset
The above gives an example of a typical Product
when you don't use it for an extended time by
Approval Number.
sliding the switch towards the charging plug.
You can view your product's Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product's label in
the "Search" bar on the web site.
EARBUDS AND YOUR
HEADSET
Your H390 headset is supplied with multiple
earbuds. The earbud is fitted onto the end of
your headset's earpiece speaker, and placed
onto your ear when using your headset.
Your headset's performance is greatly
dependent upon achieving a good fit on your
ear. Therefore, we recommend trying all the
supplied earbuds with your headset.
Power Button
MAKING CALLS
Function
Action
Receive a call
Tap the Call button
Mute or unmute a call
Tap both Volume
buttons
Reject a call
Press and hold a
Volume button until
the ringer stops
End a call
Tap the Call button
Talk Time
Redial last call
Press and hold the
Less than 2 hours
Call button until you
Between 2 to 5 hours
hear two tones
Up to 7 hours
Make a voice dial call
Tap the Call button
and wait for voice
prompt
Answer second incoming Use phone to answer
call
(follow your phone's
instructions)
Note: Your H390 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
Note: Some features are phone/network dependent.
WEARING THE
CHANGING FOR USE
ON OTHER EAR
HEADSET
You can wear your H390 headset on your left or
To wear your headset, flex the earhook and
right ear. The headset comes ready for the right
loop it over your ear as shown.
ear. To change the headset for the left ear:
1
Gently lift and pull the
top of the earhook up
and off speaker stem, as
shown.
2
Flip the headset over.
3
Attach the earhook to
the speaker stem, as
shown.
Be sure to position the ear cushion into your
ear canal for optimal audio performance and
comfort.
INDICATOR LIGHT
INDICATOR LIGHT
With No Charger Plugged In
With the Charger Plugged In
Headset Indicator
Headset Indicator
Headset Status
Off
Red
Charging (battery
level less than 70%
Three blue flashes
charge)
Steady blue
Yellow
Charging (battery
Rapid blue/purple flashes Connection successful
level more than 70%
charge)
Quick blue flash
Green
Charging complete
Slow blue pulse
Slow blue flash
Slow red flash
Slow purple pulse
Steady red
Quick red flash
Note: After 20 minutes on a call or of inactivity, the light stops
flashing to conserve power, but the headset remains on.
CHANGING VOLUME
BUTTON ORIENTATION
You can also change the orientation of the
volume buttons on your headset.
1
Turn the headset power off.
2
Press and hold the Volume button you
want to assign as the "volume up" button
and slide the switch toward the
microphone. The indicator light flashes
blue three times, then steady blue. When
connected, it will flash blue/purple.
Volume Buttons
Power Button
AUDIO TONES
Audio Tone
Headset Status
Headset Status
Ascending tone
Powering on
Power off
Two descending
Powering off
Powering on/off
tones
Pairing/connect mode
Ring tone
Incoming call
Two short tones when
Volume at minimum
pressing Volume button
or maximum
Incoming/outgoing call
High/low tones
Low battery
Connected (on a call)
repeated every 60 sec.
Standby (not on a call)
No audio indications;
Out of range
Idle (not connected
deteriorating quality
to phone)
Two ascending tones
Connected to phone
Connected call muted
Two rapid ascending
Mute enabled
Attempting to connect
tones
Low battery
Two rapid descending
Mute disabled
tones
Low tone every
Mute reminder
10 seconds