Motorola CPEI 150 series 사용자 설명서 - 페이지 24
{카테고리_이름} Motorola CPEI 150 series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola CPEI 150 series 47 페이지.
Motorola CPEI 150 series에 대해서도 마찬가지입니다: 사용자 설명서 (48 페이지)
페이지 인쇄
Advanced Configuration
Table 4-3 DHCP Server Tab Fields
Be sure to click the Apply button once you have made changes.
Lease Status Tab
The Lease Status tab in the Local Address menu displays the active DHCP leases since
the last reboot.
Table 4-4 Lease Status Tab Fields
Be sure to click the Apply button once you have made changes.
Lease Reservation Tab
This tab allows you to manage the lease reservation so that the same client receives
the same IP address each time.
68P09291A19-A
APR 2008
Field or Button
DHCP Starting IP Address
DHCP Ending IP Address
DHCP Lease Time
Field or Button
Client Host Name
MAC Address
IP Address
Remaining Lease Duration
Description
Sets the first IP address assigned by the
DHCP server, in dotted-decimal format. It
must be greater than the IP address value
of the gateway. For example, if the IP
address of the gateway is 192.168.15.1
(default), the starting IP address must be
192.168.15.2 (or higher).
Sets the final IP address assigned by the
DHCP server. If the DHCP server runs out
of DHCP addresses, users cannot access
network resources. If this happens,
increase the Ending IP (to the limit of 254)
or reduce the Lease Time.
Sets the time, in seconds, that a network
computer remains connected to the
gateway using its current assigned IP
address. At the end of this time, the DHCP
server renews the lease or assigns the
computer a new IP address. The default is
1 hour. The maximum is about 278 hours.
Description
Displays the client host name. The Name
field is limited to 20 characters (only 5
appear in display).
Media Access Control (MAC) address.
Shows the IP Address for each active
lease.
Shows the amount of time, in seconds,
remaining in the lease.
4
4-5