Motorola MDM9000 빠른 참조 매뉴얼 - 페이지 8
{카테고리_이름} Motorola MDM9000에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola MDM9000 17 페이지. For mobile computers
페이지 인쇄8
Symptom
ActiveSync
fails.
Dial-out fails
Possible Cause
A partnership was not
established with the
host computer.
Host computer is not
selected in the
ActiveSync window on
the mobile computer.
Modem RAS
connection not
allowed by host
computer.
Mobile computer or
modem was
disconnected from the
telephone line while
ActiveSync was in
progress.
Synchronization
occurred, but the
session is configured
to close immediately
after synchronization
is complete.
Location setting is
incorrect.
Incorrect server
phone number.
Pulse dialing not
supported for country.
MDM9000 Modem
Action
Establish a partnership with the
host computer as described in the
mobile computer's Product
Reference Guide.
Select a host computer in the
ActiveSync window, and perform
setup as described in the Product
Reference Guide.
Select RAS connection in the host
computer (File - Connection
Settings window). Refer to the
ReadMe files located in the
Microsoft ActiveSync folder on the
host computer.
Disconnect the modem cable for
30 seconds to hang up the local
telephone connection. Close any
open windows on the mobile
computer and any modem
connections.
Verify the setting of the When
manually synchronizing
disconnect when complete
checkbox by tapping Start -
ActiveSync - Tools - Options -
Schedule tab.
Verify Dialing Locations. Verify
Dialing Patterns are correct for the
current location. For example,
enter 'G' in the For local calls, dial:
field to dial directly, or '9,G' if the
telephone system requires dialing
'9' first to access an outside line.
Verify the connection phone
number in the Connecting window.
Use a connection within a
tone-dialing system.