Epson TM-T88 ReStick 사용 설명서 - 페이지 4
{카테고리_이름} Epson TM-T88 ReStick에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson TM-T88 ReStick 12 페이지. How to connect printer with a wireless adapter
Epson TM-T88 ReStick에 대해서도 마찬가지입니다: 사양 (2 페이지), 사양 (8 페이지), 매뉴얼 (13 페이지)
페이지 인쇄
How to connect an Epson wireless POS printer
A sheet will print showing the MAC address, SSID, mode, wireless channel number, authorization method (None, WEP),
Gateway (GW), IP address and IP assignment method.
The network specific settings have been highlighted above.
Resetting Card to Default Values
You can reset the card to the default settings by:
1. Turn off power on the printer
2. Hold the push button on the wireless card down
3. Turn on power to the printer
4. Count to 5
Check that the settings are reset by running the
Parameter
Network
Mode
SSID
IP-Address
Subnet mask 255.255.255.0
Gateway
address
IP-Address
http://www.beaglehardware.com/howtowireless.html[3/4/2011 12:28:11 PM]
Initial Value
AdHoc
EpsonNetIBSS
192.168.192.168
0.0.0.0
wireless card
self-test, above.
Setting Instructions
Infrastructure / AdHoc
Set this according to the system or leave as
is.
Set this according to your network.
Set this according to your network or use
default.
Set this according to your network.
Auto / Manual. set this according to the way