Epson TM-T88 ReStick Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Виробник етикеток Epson TM-T88 ReStick. Epson TM-T88 ReStick 12 сторінок. How to connect printer with a wireless adapter
Також для Epson TM-T88 ReStick: Технічні характеристики (2 сторінок), Технічні характеристики (8 сторінок), Посібник (13 сторінок)
Друкувати сторінку
How to connect an Epson wireless POS printer
A sheet will print showing the MAC address, SSID, mode, wireless channel number, authorization method (None, WEP),
Gateway (GW), IP address and IP assignment method.
The network specific settings have been highlighted above.
Resetting Card to Default Values
You can reset the card to the default settings by:
1. Turn off power on the printer
2. Hold the push button on the wireless card down
3. Turn on power to the printer
4. Count to 5
Check that the settings are reset by running the
Parameter
Network
Mode
SSID
IP-Address
Subnet mask 255.255.255.0
Gateway
address
IP-Address
http://www.beaglehardware.com/howtowireless.html[3/4/2011 12:28:11 PM]
Initial Value
AdHoc
EpsonNetIBSS
192.168.192.168
0.0.0.0
wireless card
self-test, above.
Setting Instructions
Infrastructure / AdHoc
Set this according to the system or leave as
is.
Set this according to your network.
Set this according to your network or use
default.
Set this according to your network.
Auto / Manual. set this according to the way