Epson 4000 - Stylus Pro Color Inkjet Printer 여기에서 시작하기 매뉴얼

{카테고리_이름} Epson 4000 - Stylus Pro Color Inkjet Printer에 대한 여기에서 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 4000 - Stylus Pro Color Inkjet Printer 6 페이지. Print engine
Epson 4000 - Stylus Pro Color Inkjet Printer에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 제품 참조 매뉴얼 (38 페이지), 제품 정보 (13 페이지), 제품 지원 게시판 (17 페이지), 중요 정보 (2 페이지), 제한 보증 (12 페이지), 빠른 참조 매뉴얼 (11 페이지), 브로셔 및 사양 (12 페이지), 브로셔 및 사양 (6 페이지), 설정 매뉴얼 (16 페이지)

EPSON

Start Here

Unpack

Make sure you have all the parts shown below for your EPSON Stylus Pro 4000:

Roll paper spindle

Warning:

Remove all the packing materials and

tape. Save the box and packaging in case

you need to ship the printer.

Loosen the two screws and remove the

carriage retainer bracket.

Unlock the print head carriage by

pulling the green tab to the left. Do

not remove the tab.

To lock the print head carriage

Note:

for transportation, push the green tab to

the right.

Set Up and Plug In

Connect the power cord to the AC

inlet on the back of the printer.

Plug the other end of the power

cord into a properly grounded

electrical outlet.

Attach the exhaust port cover by sliding it

along the slots on the back of the printer.

Insert the paper tray into the slots at

the front of the printer.

Stylus

Printer

Ink cartridges

The printer weighs about 85 pounds, and should be lifted by two people.

Pro 4000

Exhaust port cover

Paper tray

Power cord

Spindle adapters

(attached to spindle)

AC inlet