Epson 4000 - Stylus Pro Color Inkjet Printer Buradan Başlayın Kılavuzu

Yazılım Epson 4000 - Stylus Pro Color Inkjet Printer için çevrimiçi göz atın veya pdf Buradan Başlayın Kılavuzu indirin. Epson 4000 - Stylus Pro Color Inkjet Printer 6 sayfaları. Print engine
Ayrıca Epson 4000 - Stylus Pro Color Inkjet Printer için: Broşür ve Teknik Özellikler (4 sayfalar), Ürün Referans Kılavuzu (38 sayfalar), Ürün Bilgileri (13 sayfalar), Ürün Destek Bülteni (17 sayfalar), Önemli Bilgiler (2 sayfalar), Sınırlı Garanti (12 sayfalar), Hızlı Referans Kılavuzu (11 sayfalar), Broşür ve Teknik Özellikler (12 sayfalar), Broşür ve Teknik Özellikler (6 sayfalar), Kurulum Kılavuzu (16 sayfalar)

EPSON

Start Here

Unpack

Make sure you have all the parts shown below for your EPSON Stylus Pro 4000:

Roll paper spindle

Warning:

Remove all the packing materials and

tape. Save the box and packaging in case

you need to ship the printer.

Loosen the two screws and remove the

carriage retainer bracket.

Unlock the print head carriage by

pulling the green tab to the left. Do

not remove the tab.

To lock the print head carriage

Note:

for transportation, push the green tab to

the right.

Set Up and Plug In

Connect the power cord to the AC

inlet on the back of the printer.

Plug the other end of the power

cord into a properly grounded

electrical outlet.

Attach the exhaust port cover by sliding it

along the slots on the back of the printer.

Insert the paper tray into the slots at

the front of the printer.

Stylus

Printer

Ink cartridges

The printer weighs about 85 pounds, and should be lifted by two people.

Pro 4000

Exhaust port cover

Paper tray

Power cord

Spindle adapters

(attached to spindle)

AC inlet