Epson 4000 - Stylus Pro Color Inkjet Printer 제품 지원 게시판 - 페이지 10

{카테고리_이름} Epson 4000 - Stylus Pro Color Inkjet Printer에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 4000 - Stylus Pro Color Inkjet Printer 17 페이지. Print engine
Epson 4000 - Stylus Pro Color Inkjet Printer에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 제품 참조 매뉴얼 (38 페이지), 제품 정보 (13 페이지), 여기에서 시작하기 매뉴얼 (6 페이지), 중요 정보 (2 페이지), 제한 보증 (12 페이지), 빠른 참조 매뉴얼 (11 페이지), 브로셔 및 사양 (12 페이지), 브로셔 및 사양 (6 페이지), 설정 매뉴얼 (16 페이지)

5.5.1

Give your user defined paper size a name, we will use

"10 X 8" for this example.

5.5.2

Give your user defined paper size a Width of 10" (1000

x .01) and a Height of 8" (800 x .01).

5.5.3

Click Save then OK.

5.6

Under the Paper tab choose the following settings:

EPSON Professional Graphics Group

5.6.1

For Paper Source select Roll Paper.

5.6.2

Check Select Borderless then select Auto Expand from

the drop down menu.

5.6.3

From the Auto Cut drop down menu select the "Single

Cut or "Double Cut" option for borderless prints.

(See the "Cutting Option" section for cutting selection details)

Selecting an incorrect cut option, will result

in an unnecessary margin before or after

the printed image.

5.6.4

Under Paper Size make sure your User Defined paper

size of 10 X 8 is selected from the drop down list.

5.6.5

After all Paper selections are correct click on the Main

tab

5.6.6

On the Main screen do not select the "Print Preview"

option. If selected you will have a margin between

prints like the example shown under "CUTTING

OPTIONS" for Double Cut. This is due to the delay in

spooling the jobs to printer because of the preview.

As a result they are handled as if they were individual

print requests. To eliminate the margin between prints

when multiple jobs are spooling turn Off the Print Pre-

view driver option.

Page 6 of 8.