Epson 6110i - PowerLite XGA LCD Projector 사용자 설명서 - 페이지 14

{카테고리_이름} Epson 6110i - PowerLite XGA LCD Projector에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 6110i - PowerLite XGA LCD Projector 17 페이지. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Epson 6110i - PowerLite XGA LCD Projector에 대해서도 마찬가지입니다: 사용자 설명서 (42 페이지), 운영 매뉴얼 (36 페이지), 운영 매뉴얼 (47 페이지), 사양 (2 페이지), 보충 설명서 (1 페이지), 빠른 설정 매뉴얼 (7 페이지), 사용자 설명서 (1 페이지), 부품 목록 (1 페이지), 적합성 선언 (4 페이지), 제품 지원 게시판 (25 페이지), 제품 지원 게시판 (22 페이지), 제품 지원 게시판 (28 페이지), 제품 지원 게시판 (41 페이지), 제품 지원 게시판 (15 페이지), 제품 지원 게시판 (22 페이지)

페이지 인쇄

Epson 6110i - PowerLite XGA LCD Projector 사용자 설명서

Epson PowerLite 6110i

4. To release the lamp cover, insert the screwdriver included

with the new lamp as shown, then remove the cover.

5. Loosen the two screws holding the lamp in place (you can't

remove them).

6. Pull the lamp straight out.

Note:

The lamp(s) in this product contain mercury. Please

consult your state and local regulations regarding disposal or

recycling. Do not put in the trash.

7. Gently insert the new lamp.

8. Once the lamp is fully inserted, tighten its screws and

replace the cover. (The projector won't come on if the lamp

cover is loose.)

9. Reset the lamp timer as described in the next section.

Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer

using the projector's menu.

1. Plug the projector in and turn it on.

2. Press the

button on the remote control, select

from the Reset menu, then press

Lamp Hours

Note: The lamp usage timer shows 0H until you've used the

lamp for at least 10 hours.

3. When you see the confirmation message, select

press

Enter

4. When you're finished, press

Transporting the Projector

The projector contains many glass and precision parts. Follow

these guidelines to prevent injury or damage:

❏ When hand-carrying the projector, you should use the

handle to lift it only a short distance (for example, to set it

on a table).

❏ When shipping the projector for repairs, use the original

packaging material if possible. If you do not have the

original packaging, use equivalent materials, placing plenty

of cushioning around the projector.

❏ When transporting the projector a long distance, first place

it in a hard-shell shipping case, and then pack it in a firm

box, placing cushioning around the case.

Note: Epson shall not be liable for any damages incurred during

transportation.

12/07

Reset

Enter

, then

Yes

to exit the menu system.