Epson 6110i - PowerLite XGA LCD Projector Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson 6110i - PowerLite XGA LCD Projector. Epson 6110i - PowerLite XGA LCD Projector 17 pagina's. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Ook voor Epson 6110i - PowerLite XGA LCD Projector: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Bedieningshandleiding (47 pagina's), Specificaties (2 pagina's), Aanvullende handleiding (1 pagina's), Handleiding voor snelle installatie (7 pagina's), Gebruikershandleiding (1 pagina's), Onderdelenlijst (1 pagina's), Conformiteitsverklaring (4 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's)

Pagina afdrukken

Epson 6110i - PowerLite XGA LCD Projector Gebruikershandleiding

Epson PowerLite 6110i

4. To release the lamp cover, insert the screwdriver included

with the new lamp as shown, then remove the cover.

5. Loosen the two screws holding the lamp in place (you can't

remove them).

6. Pull the lamp straight out.

Note:

The lamp(s) in this product contain mercury. Please

consult your state and local regulations regarding disposal or

recycling. Do not put in the trash.

7. Gently insert the new lamp.

8. Once the lamp is fully inserted, tighten its screws and

replace the cover. (The projector won't come on if the lamp

cover is loose.)

9. Reset the lamp timer as described in the next section.

Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer

using the projector's menu.

1. Plug the projector in and turn it on.

2. Press the

button on the remote control, select

from the Reset menu, then press

Lamp Hours

Note: The lamp usage timer shows 0H until you've used the

lamp for at least 10 hours.

3. When you see the confirmation message, select

press

Enter

4. When you're finished, press

Transporting the Projector

The projector contains many glass and precision parts. Follow

these guidelines to prevent injury or damage:

❏ When hand-carrying the projector, you should use the

handle to lift it only a short distance (for example, to set it

on a table).

❏ When shipping the projector for repairs, use the original

packaging material if possible. If you do not have the

original packaging, use equivalent materials, placing plenty

of cushioning around the projector.

❏ When transporting the projector a long distance, first place

it in a hard-shell shipping case, and then pack it in a firm

box, placing cushioning around the case.

Note: Epson shall not be liable for any damages incurred during

transportation.

12/07

Reset

Enter

, then

Yes

to exit the menu system.