Epson 6110i - PowerLite XGA LCD Projector 사용자 설명서 - 페이지 6

{카테고리_이름} Epson 6110i - PowerLite XGA LCD Projector에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 6110i - PowerLite XGA LCD Projector 17 페이지. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Epson 6110i - PowerLite XGA LCD Projector에 대해서도 마찬가지입니다: 사용자 설명서 (42 페이지), 운영 매뉴얼 (36 페이지), 운영 매뉴얼 (47 페이지), 사양 (2 페이지), 보충 설명서 (1 페이지), 빠른 설정 매뉴얼 (7 페이지), 사용자 설명서 (1 페이지), 부품 목록 (1 페이지), 적합성 선언 (4 페이지), 제품 지원 게시판 (25 페이지), 제품 지원 게시판 (22 페이지), 제품 지원 게시판 (28 페이지), 제품 지원 게시판 (41 페이지), 제품 지원 게시판 (15 페이지), 제품 지원 게시판 (22 페이지)

페이지 인쇄

Epson 6110i - PowerLite XGA LCD Projector 사용자 설명서

Epson PowerLite 6110i

Turning Off the Projector

When you're finished using the projector, follow the steps

below to shut it down. This extends the life of the lamp and

protects the projector from possible overheating.

Note: When the projector has not received any input signals for 30

minutes, it automatically turns off the projection lamp and enters

"sleep mode." This conserves electricity, cools the projector, and

extends the life of the lamp. If you want to start projecting again,

press the P Power button. If you are done using the projector,

unplug the power cord. To turn off sleep mode, see the

User's Guide.

Turn off this product when not in use to prolong the life of the

projector.

1. Turn off and disconnect any equipment plugged into the

projector.

2. To turn off the projector, press the P

Power button

3. When the P Power light is steady orange, you can unplug

the projector.

4. With Epson's exclusive Instant Off

cool-down period. When you're done, just unplug the

projector.

Caution: To avoid damaging the projector or lamp, never unplug

the power cord when the P Power light is green or flashing orange.

button twice.

Power

technology, there's no

12/07

Adjusting the Image and Presentation

The following sections describe how to adjust the image and

control your presentation.

Focusing and Zooming Your Image

Open the lens access door, then do the following:

❏ Use the

ring to sharpen the image.

Focus

❏ Use the

ring to reduce or enlarge the image. Move

Zoom

the ring toward the

to increase the size, or toward the

to decrease it.

If the image still isn't large enough, you may need to move

the projector farther away from the screen. You can also use

the

buttons on the remote control to zoom in on a

E-Zoom

portion of the image. See page 8 for instructions.

Adjusting the Height of Your Image

If the image is too low on the screen, you can use the front

adjustable feet to raise it.

1. Lift the front of the projector and turn the front feet to

adjust the position of the projected image.

Focus ring

Zoom ring

Turn to adjust

image height