Epson PowerLite 6110i
Switching Between Picture Sources
If your projector is connected to more than one computer
and/or video source, you can switch between the different
sources:
❏ On the projector's control panel, use the
button to switch between equipment connected to the
,
Computer1
Computer2
❏ On the remote control, use
the four
buttons to
Source
switch between equipment
connected to the port
identified on each button.
After you select a source, the
screen goes dark for a moment
before the image appears.
Turning Off the
Picture and Sound
You can use the
A/V Mute
button on the remote control to
turn off the image and sound
and darken your screen. (If
you've connected an external
monitor to the projector, it will
continue displaying.) This
feature is useful if you want to
temporarily redirect your
audience's attention without the
distraction of a bright screen.
❏ To turn off the picture, press the
screen goes dark.
❏ To turn the image back on, press the button again.
You can also have an image, such as a company logo, display
on the screen whenever you press the
Stopping Action
You can use the remote control
to stop the action in your video
or computer image.
❏ Press the
button to
Freeze
stop the action and keep the
current image on the screen.
The sound continues.
❏ Press the
button
Freeze
again to restart it.
Note: This function pauses the image, but not the sound. Also,
because the source continues to transmit signals, you won't
resume the action from the point you paused it.
8
Source Search
,
, and
ports.
Video
S-Video
Source buttons
button. The
A/V Mute
button.
A/V Mute
Zooming Your Image
You can zoom in on a portion of the image using the
buttons on the remote control.
1. Press the
E-Zoom
on the remote control.
You see a cross-hair
indicating the center of the
zoom-in area.
2. Use the
pointer button
to position the cross-hair.
3. Continue pressing the
button to enlarge
E-Zoom
the selected area up to 4×.
4. While the image is enlarged, you can:
❏ Use the
pointer button to pan around the image.
❏ Press the
E-Zoom
5. When done, press the
size.
Changing the Image's Aspect Ratio
If you're projecting a widescreen format image, you can use
the
button on the remote control to change the aspect
Aspect
(width to height) ratio from
You can change video images
to
(widescreen format),
16:9
or
(
) or
16:9
Up
16:9
(to accommodate subtitles or
supertitles).
You can change computer
images to
(widescreen
16:9
format) or
.
Normal
Press the
button again to cycle through the available
Aspect
options.
You can also change the aspect ratio using the projector's
Signal menu. See the User's Guide for details.
12/07
button
button to zoom out.
button to return to the original
Esc
.
4:3
(
)
Down
E-Zoom
페이지 인쇄