Epson C11C546011-N - Stylus Photo R200 사용자 설명서 - 페이지 10
{카테고리_이름} Epson C11C546011-N - Stylus Photo R200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C11C546011-N - Stylus Photo R200 12 페이지. User manual (p.i.m plug-in)
Epson C11C546011-N - Stylus Photo R200에 대해서도 마찬가지입니다: 보충 설명서 (1 페이지), 여기에서 시작하기 매뉴얼 (9 페이지), 사용자 설명서 (12 페이지)
페이지 인쇄
EPSON Stylus Photo R200
Aligning the Print Head
If your printouts contain misaligned vertical lines, or you see
light or dark horizontal banding, you may need to align the
print head.
1. Turn on the printer.
2. Load several sheets of plain, letter-size paper.
3. Do one of the following:
❏ Windows: Right-click the
the lower right corner of your screen). Select
.
Alignment
❏ Macintosh OS X: Open the
select
EPSON Printer Utility
the printer list, click
.
Alignment
❏ Macintosh OS 8.6 to 9.x: From the File menu, select
or
Page Setup
Print
Print Head Alignment
4. Follow the instructions on the screen to print the alignment
pattern.
You see a window like this one:
5. On the test page, select the square without any visible
bands. You may need to use a magnifying glass or loupe.
6. Select one square each for rows 1 to 4, then enter the
number of the best square in the corresponding boxes on
the screen. Then click
If you can't find a square without visible bands, choose the
one that's best. Then click
test page and repeat this step.
7. After you click
, follow the instructions on the screen
Next
to print the next test page.
EPSON Stylus Photo R200
10 -
icon on your taskbar (in
Print Head
folder and
Applications
. Select
SP R200 Series
, then select
OK
Print Head
. Click the
icon, then select
.
.
Next
to print another
Realignment
You see a window like this one:
in
8. On the test page, select the square without any visible
bands. You may need to use a magnifying glass or loupe.
9. Select one square each for rows 1 to 4, then enter the
number of the best square in the corresponding boxes on
the screen. Then click
If you can't find a square without visible bands, choose the
one that's best. Then click
test page and repeat this step.
Cleaning the Printer
To keep your printer working at its best, you should clean it
several times a year.
1. Turn off the printer, unplug the power cord, and
disconnect the USB cable.
2. Remove all the paper, then use a soft brush to clean the
sheet feeder.
3. If the outer case or inside of the sheet feeder are dirty, clean
it with a soft cloth dampened with mild detergent. Keep the
printer cover closed to prevent water from getting inside.
11/03
.
Finish
to print another
Realignment