ARID-Dry MS-600 설치 및 운영 매뉴얼 - 페이지 6

{카테고리_이름} ARID-Dry MS-600에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ARID-Dry MS-600 14 페이지. Desiccant dehumidifier

A "POWER ON" lamp is provided to indicate that power is applied to the machine.

A "RUN" lamp is provided to indicate that the unit is operational. This lamp will be illuminated

when the "ON-OFF" switch is in the "ON" position.

Switch the "ON-OFF" to the "ON" position. The machine will start operating. At this point, both

fans, reactivation heaters, and rotor drive will be operational.

If humidity control is desired to prevent over drying, a flanged receptacle is provided for a

remote humidity sensor. Connect the appropriate plug and humidity sensor with dry contacts

only-DO NOT APPLY VOLTAGE TO THIS CIRCUIT. Open the control enclosure door and

switch the "AUTO/MAN" switch to the "AUTO" position. The reactivation fan, heater, and drive

circuit will now cycle on and off from the humidistat input.

An hour meter is provided to track time of operation for to aid in scheduling inspection and

maintenance.

CONTROLS/ELECTRICAL

- 2 -