ARID-Dry MS-600 Installatie- en bedieningshandleiding - Pagina 6
Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} ARID-Dry MS-600. ARID-Dry MS-600 14 pagina's. Desiccant dehumidifier
Pagina afdrukken
A "POWER ON" lamp is provided to indicate that power is applied to the machine.
A "RUN" lamp is provided to indicate that the unit is operational. This lamp will be illuminated
when the "ON-OFF" switch is in the "ON" position.
Switch the "ON-OFF" to the "ON" position. The machine will start operating. At this point, both
fans, reactivation heaters, and rotor drive will be operational.
If humidity control is desired to prevent over drying, a flanged receptacle is provided for a
remote humidity sensor. Connect the appropriate plug and humidity sensor with dry contacts
only-DO NOT APPLY VOLTAGE TO THIS CIRCUIT. Open the control enclosure door and
switch the "AUTO/MAN" switch to the "AUTO" position. The reactivation fan, heater, and drive
circuit will now cycle on and off from the humidistat input.
An hour meter is provided to track time of operation for to aid in scheduling inspection and
maintenance.
CONTROLS/ELECTRICAL
- 2 -