Dimplex 6910000100 서비스 매뉴얼 - 페이지 12

{카테고리_이름} Dimplex 6910000100에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex 6910000100 18 페이지.
Dimplex 6910000100에 대해서도 마찬가지입니다: 서비스 매뉴얼 (18 페이지)

페이지 인쇄

Figure 3

Preparation for Service

NOTE: All components are replaceable from the front

of the fireplace while the unit is mounted in the wall.

Tools Required: Philips head screwdriver

WARNING: Disconnect power before attempting any

maintenance or cleaning to reduce the risk of electric

shock or damage to persons.

CAUTION: If unit was operating prior to servicing allow

at least 10 minutes for lights and heating elements to cool

off to avoid accidental burning of skin.

NOTE: All instructions are created for replacement

of the XLF50 components and as a result the number of

screws may differ for the XLF60, XLF74, and XLF100.

1. Turn the breaker off at the electrical panel.

2. Remove the front glass assembly by removing the 2

screws (1 on the left and 1 on the right side, located

just inside the top front vent opening). These screws

secure the front glass panel to the inside of the fire-

place. (Figure 4)

3. Lift the front glass assembly out of the unit and care-

fully place the glass assembly aside in a safe location.

4. Remove the decorative acrylic ember-bed pieces from

the media tray, which lies along the bottom of the inter-

ior partially reflective glass. A medium sized container

such as a bucket or a box will be needed to keep the

acrylic ember-bed pieces together.

5. Attach the suction cup to the partially reflective glass to

assist with removal (XLF74 & XLF100.)

6. Remove the 12 screws from the glass retaining brack-

et, starting on either end and working your way to the

XLF50

50.31 in [1278 mm]

XLF60

60.31 in [1532 mm]

XLF74

74.31 in [1887 mm]

XLF100 100.31 in [2548 mm]

XLF50 51.41 in [1306 mm]

XLF60 61.41 in [1560 mm]

XLF74 75.41 in [1941 mm]

XLF100 101.41 in [2576 mm]

Figure 4

Figure 5

4.34 in.

110 mm

5.79 in.

147 mm