Eci Telecom B-FOCuS 312 사용자 설명서 - 페이지 12
{카테고리_이름} Eci Telecom B-FOCuS 312에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Eci Telecom B-FOCuS 312 16 페이지.
B-FOCuS Router 312+
5
Buttons and LEDs
5.1
Buttons/Ports
This section describes the ports and buttons on the router.
ADSL
Port
Figure 2. B-FOCuS Router 312+ Back Panel
• Reset Button. To reset the router, press and release the Reset button;
after about 30 seconds the unit will become operational.
• Restore to Factory Defaults. You may need to restore the factory
defaults if the configuration of your unit is changed, if you lose both
network connectivity and the ability to interface to the unit via the web
interface, or following a failed software upgrade. To restore factory
defaults, press the Reset button for more than 10 seconds. The unit
reverts to its factory defaults and after about 30 seconds becomes
operational again.
• LAN (Local Area Network) Port. Connect to Ethernet network
devices, such as a PC, hub, switch, or router. Depending on the
connection, you may need a cross-over cable or a straight-through
cable.
• Power. Make sure you observe the proper power requirements.
• ADSL Port. WAN interface that connects directly to the phone line.
ECI Telecom Ltd. Proprietary
Reset
Button
LAN
Port
8
DWG# 458006-0833-010 A00
User Guide
Power
On/Off
Button