Epson Perfection 1670 Photo 서비스 매뉴얼 - 페이지 23

{카테고리_이름} Epson Perfection 1670 Photo에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Perfection 1670 Photo 46 페이지. Color image scanner
Epson Perfection 1670 Photo에 대해서도 마찬가지입니다: 제품 정보 (7 페이지), 수동 시작 (9 페이지), 매뉴얼 (11 페이지), 업데이트 (1 페이지), 제품 지원 게시판 (17 페이지), 제품 지원 게시판 (12 페이지), 중요 안전 지침 (4 페이지), 브로셔 및 사양 (2 페이지)

페이지 인쇄
Epson Perfection 1670 Photo 서비스 매뉴얼
EPSON Perfection 1670 Photo/Perfection 1270

2.2.5 Removal of CR Motor

1.
Remove the Upper Housing. (Refer to 2.2.2)
2.
Remove the three screws (CBP M3x8) that are securing the CR Motor.
3.
Disconnect the CR Motor Connector Cable from the I/F Board. (Refer to Figure 2-9.)
4.
After releasing the CR Motor Connector Cable from the groove of the Lower Housing,
pull it out of the holes. (Refer to Figure 2-19.)
When reinstalling the CR Motor, securely set the Connector Cable
C A U T I O N
into the holes and groove of the Lower Housing. If the Connector
Cable is set in an isolated state, it may be entangled when the Carriage
operates.
Hole
CR Motor Connector Cable
Figure 2-19. Routing of CR Motor Connector Cable
5.
Lift the CR Motor, remove the Timing Belt from the Transmission Gear, and remove
the CR Motor.
DISASSEMBLY/ASSEMBLY
CR Motor
Hole
Disassembly Procedure
CBP (M3x8)
Tightening torque 6-8kgfcm
Figure 2-20. Removal of CR Motor Unit
CR Motor
Transmission Gear
Timing Belt
Figure 2-21. Removal of Timing Belt
Revision B
23