Epson Perfection 1670 Photo Service Manual - Page 23

Browse online or download pdf Service Manual for Software Epson Perfection 1670 Photo. Epson Perfection 1670 Photo 46 pages. Color image scanner
Also for Epson Perfection 1670 Photo: Product Information (7 pages), Start Manual (9 pages), Manual (11 pages), Update (1 pages), Product Support Bulletin (17 pages), Product Support Bulletin (12 pages), Important Safety Instructions (4 pages), Brochure & Specs (2 pages)

Print Page

EPSON Perfection 1670 Photo/Perfection 1270

2.2.5 Removal of CR Motor

Remove the Upper Housing. (Refer to 2.2.2)

Remove the three screws (CBP M3x8) that are securing the CR Motor.

Disconnect the CR Motor Connector Cable from the I/F Board. (Refer to Figure 2-9.)

After releasing the CR Motor Connector Cable from the groove of the Lower Housing,

pull it out of the holes. (Refer to Figure 2-19.)

When reinstalling the CR Motor, securely set the Connector Cable

C A U T I O N

into the holes and groove of the Lower Housing. If the Connector

Cable is set in an isolated state, it may be entangled when the Carriage

operates.

Hole

CR Motor Connector Cable

Figure 2-19. Routing of CR Motor Connector Cable

Lift the CR Motor, remove the Timing Belt from the Transmission Gear, and remove

the CR Motor.

DISASSEMBLY/ASSEMBLY

CR Motor

Hole

Disassembly Procedure

CBP (M3x8)

Tightening torque 6-8kgfcm

Figure 2-20. Removal of CR Motor Unit

CR Motor

Transmission Gear

Timing Belt

Figure 2-21. Removal of Timing Belt

Revision B