Toshiba e-BRIDGE Re-Rite 설정 매뉴얼 - 페이지 10
{카테고리_이름} Toshiba e-BRIDGE Re-Rite에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba e-BRIDGE Re-Rite 42 페이지.
페이지 인쇄
Configure address of Toshiba MFP
Toshiba MFP name or IP address
e-BRIDGE Re-Rite software has been designed specifically to enhance your Toshiba
MFP scan functionality and is therefore only available with an applicable MFP model.
For continuous operation of this software it is mandatory to be registered with a Toshiba
MFP as failure to do so will cease its functionality.
Configuration
To obtain the Toshiba MFP name or IP address please consult your IT
manager. An IP address is only suitable where your MFP has been assigned
a static address if this is not the case then the NetBIOS name should be
used instead.
1.
Open the e-BRIDGE Re-Rite control panel.
2.
Click the General tab.
3.
Enter your MFP's address (NetBIOS name or IP address)
in the Toshiba MFP name or IP address field.
4.
Click on Apply.
5.
Click on OK.
Installation/Configuration of e-BRIDGE Re-Rite
6