Toshiba e-BRIDGE Re-Rite 설정 매뉴얼 - 페이지 8

{카테고리_이름} Toshiba e-BRIDGE Re-Rite에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba e-BRIDGE Re-Rite 42 페이지.

Registering a Software License

Each installation has a 30 day trial period during which you can use the software

without registering. Once the 30 day trial period is complete, the e-BRIDGE Re-Rite will

stop working and you will no longer be able to convert scanned documents until you

complete the registration process.

The machine on which your e-BRIDGE Re-Rite software is installed must

have internet access to take advantage of automatic registration.

If you entered your serial number and details during the installation, you can use the

e-BRIDGE Re-Rite Control Panel to automatically register your software:

1. Open the e-BRIDGE Re-Rite control panel.

2. Click the License tab.

3. Click Register now.

The information you entered during installation is sent to Redmap and your site key

is returned. An email detailing your registration information is also sent to the email

address you supplied.

4. When the site key appears, click OK to complete the registration process.

5. See "Configure address of Toshiba MFP"

Use this procedure to register your software if you did not enter a serial number during

the installation or if your e-BRIDGE Re-Rite machine does not have internet access.

1. On the machine with e-BRIDGE Re-Rite installed, open the e-BRIDGE Re-Rite

control panel.

2. Click the License tab.

3. In the Serial number field enter the serial number that accompanied your

Installation CD.

4. Click Apply.

The Site code field displays the code generated specifically for your installation.

5. Take a note of both the serial number and site code.

6. If required, you can enter the location of a proxy server to use to access the

registration web site.

Select Use proxy server, and enter the address and port number of the desired

server.

If you are accessing the internet from a different computer, ignore this step.

7. Click Register now to access the Redmap online registration web page.

If you are accessing the internet from a different computer, go to

http://www.redmap.com/re-rite/registrationform.asp

Installation/Configuration of e-BRIDGE Re-Rite