Epson Stylus Pro 4880 Portrait Edition 빠른 참조 매뉴얼 - 페이지 2

{카테고리_이름} Epson Stylus Pro 4880 Portrait Edition에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus Pro 4880 Portrait Edition 12 페이지. Warranty statement
Epson Stylus Pro 4880 Portrait Edition에 대해서도 마찬가지입니다: 브로셔 (1 페이지), 사양 시트 (6 페이지), 브로셔 및 사양 (6 페이지), 설정 매뉴얼 (16 페이지), 네트워크 매뉴얼 (46 페이지), 설치 매뉴얼 (4 페이지), 제품 정보 매뉴얼 (16 페이지), 제한 보증 (12 페이지)

페이지 인쇄

Epson Stylus Pro 4880 Portrait Edition 빠른 참조 매뉴얼

Loading Roll Paper

Slide the black paper stop off the end of

the spindle.

Note:

To use paper with a 2-inch core, remove the

gray adapters from the paper stops at each end.

See your Printer Guide for details.

Position the roll as shown, then slide it onto

the spindle.

Slide the black paper stop back onto the spindle and

insert it firmly into the end of the roll.

Open the roll paper cover.

Place the roll paper in the printer as shown. (The

black end of the spindle goes on the left.)

Make sure the printer is turned on, then press

the paper source button until the or

icon appears.

Raise the roll paper support on top of the paper

tray cover.

Release the paper lever.

Hold both sides of the paper and feed it into

the slot.

Feed the paper all the way through the printer until

it is aligned with the OTHERS mark on the paper

tray cover. Align the right edge of the paper with

the vertical mark on the right side of the tray cover.

Then return the paper lever to the secured position

and close the roll paper cover.

The printer automatically feeds the paper to the

printing position.

Caution:

To prevent creasing the paper, remove it

from the paper path and roll it up when you're not

printing.

OTHERS