Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst 포장 풀기 및 설정 지침 - 페이지 7

{카테고리_이름} Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst에 대한 포장 풀기 및 설정 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst 28 페이지. Warranty statement
Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst에 대해서도 마찬가지입니다: 브로셔 (1 페이지), 시작하기 (13 페이지), 브로셔 및 사양 (8 페이지), 네트워크 매뉴얼 (46 페이지), 매뉴얼 (12 페이지), 제한 보증 (12 페이지)

페이지 인쇄
Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst 포장 풀기 및 설정 지침
Tools:
F
G
H
I
F:
Hex wrench
G:
Hex socket head bolts (4)
H:
Wing nuts, spring washers, and washers(2)
H is for connecting the printer unit to the base unit.
I:
Paper feed support films (5)
Assembling the base unit
c
Caution:
Have two people working on either side to
assemble the base unit (20.5 kg).
1. Hold base upright left (A) and a horizontal
strut as shown. Then fix the strut to the base
using the two hex socket head bolts (G) with
the hex wrench (F).
Note:
❏ An instruction sticker about the setting paper
basket is attached to the front of a base upright
right.
❏ Do not fasten the screws too tight. Leave a
room to adjust the position when you fasten
the screw on the other base upright.
G
A
2. Referring to step 1, secure the other side of the
strut to the base (B).
3. Fasten four screws on the both sides of the
base upright securely.
This completes assembly of the base unit. Before
attaching the paper basket, mount the printer on
the base unit.
5