Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst 포장 풀기 및 설정 지침 - 페이지 8

{카테고리_이름} Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst에 대한 포장 풀기 및 설정 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst 28 페이지. Warranty statement
Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst에 대해서도 마찬가지입니다: 브로셔 (1 페이지), 시작하기 (13 페이지), 브로셔 및 사양 (8 페이지), 네트워크 매뉴얼 (46 페이지), 매뉴얼 (12 페이지), 제한 보증 (12 페이지)

페이지 인쇄
Epson Stylus Pro 9880 ColorBurst Edition - Stylus Pro 9880 ColorBurst 포장 풀기 및 설정 지침
Unpacking the printer
c
Caution:
The printer unit is heavy and unwieldy. Have
two people unpack the printer unit, and four
people place the printer unit on top of the base
unit.
1. Remove the roll paper spindle with roll paper,
polystyrene foam, and cardboard cushions
from around the printer.
2. Lift the box up and away from the printer.
Remove all items from the hollow (A and B)
on the rear side of the printer.
Note:
The ink cartridges included with your printer are
primarily for initial setup.
3. Take out the cardboard panels from the
printer.
6
Mounting the printer on the base unit
1. Lock the two front casters (J).
J
Note:
Place the casters sideways and lock them so they
will not move.
2. Position the base unit in front of the printer
unit as shown.
3. Mount the printer on the base unit as shown
below.
c
Caution:
Do not attempt to lift the printer unit with
fewer than four people.