Toshiba e-STUDIO7516AC 사용자 설명서 - 페이지 16
{카테고리_이름} Toshiba e-STUDIO7516AC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba e-STUDIO7516AC 20 페이지. Sys board diagnosis tool
Toshiba e-STUDIO7516AC에 대해서도 마찬가지입니다: 관리 매뉴얼 (32 페이지), 운영자 매뉴얼 (32 페이지)
페이지 인쇄
No. Inspection item
18 CPU FAN
Procedure when the result is OK
Inspection results of optional items such as the USB Host and Fax will not show as
"NG", so check it separately if necessary. Items to be confirmed are displayed as
"OK?" in red. Items marked with "OK" in black have been confirmed and there is not
a problem.
In the case of software related errors such as system firmware and other
software, the judgement result is often displayed as OK. If necessary, perform
HDD format and reinstall the software.
If the inspection result is "OK?", refer to the option connect status in the Table below.
Check the connection status of the option and then troubleshoot if necessary.
Inspection result
NG
16
Correspondence
Step 1. Check if the fan is rotating properly.
⇒ If rotating, replace the SYS board.
⇒ If not rotating, go to Step 2.
Step 2. Check the FAN connector
(CN117).
⇒ If not improved, go to Step 3.
Step 3. Replace the following parts in
sequence.
• FAN
• SYS board
V01