Toshiba e-STUDIO8518A 사용자 설명서 - 페이지 4

{카테고리_이름} Toshiba e-STUDIO8518A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba e-STUDIO8518A 20 페이지. Sys board diagnosis tool
Toshiba e-STUDIO8518A에 대해서도 마찬가지입니다: 관리 매뉴얼 (32 페이지), 운영자 매뉴얼 (32 페이지)

페이지 인쇄

Introduction

This manual describes the procedure for using the SYS Board Diagnosis Tool.

This tool inspects the parts function of the SYS board, the communication functions

connecting with other boards, and the HDD function.

The setting values saved in the machine, and the software are not erased.

Do not use this tool for other purposes.

Use this tool when any of the following symptoms has occurred:

• The cause of the call for service is not known and replacing the SYS board is

determined (Conditions of the SYS board are checked).

• The equipment does not start (Control Panel is not displayed)

• A call for service related to the SYS board has occurred.

• A call for service related to the HDD has occurred.

• AN "F" series error has occurred.

Target Models

This tool can only be used on the following models. It does not work properly on any

other models.

• e-STUDIO2010AC/2510AC

• e-STUDIO2015C/2515AC/3015AC/3515AC/4515AC/5015AC

• e-STUDIO2018A/2518A/3018A/3518A/4518A/5018A

• e-STUDIO5516AC/6516AC/7516AC

•

e-STUDIO5518A/6518A/7518A/8518A

USB Memory Requirements

A USB memory must be formatted in FAT 32 and meet the following requirements:

• Capacity 1GB above

• USB 2.0 or higher

Note: A USB memory that is 32GB or larger must be formatted with exFAT.