Philips BTD7170 사용자 설명서 - 페이지 12
{카테고리_이름} Philips BTD7170에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips BTD7170 32 페이지.
Philips BTD7170에 대해서도 마찬가지입니다: 사용자 설명서 (32 페이지)
Connect power
Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•
Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•
Before you connect the AC power cord, ensure that
you have completed all other connections.
SUB OUT
SPEAKER OUT
VIDEO AUDIO IN
HDMI
Prepare the remote control
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert the supplied AAA batteries with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
10
EN
Demonstrate the features
In standby mode, press and hold
seconds to demonstrate features of this device.
» The features are displayed one by one
across the display panel.
•
To turn off the demonstration, press
again.
Set clock
1
In standby mode, press and hold CLOCK
on the remote control for three seconds.
» [24H] or [12H] hour format is
displayed.
2
to select [24H] or [12H]
Press
/
hour format.
3
press CLOCK to confirm.
» The hour digits are displayed and begin
to blink.
4
Repeat steps 2-3 to set hour and minute.
Note
•
If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
Tip
•
You can view clock information in power-on mode by
pressing CLOCK.
Turn on
Press .
» The unit switches to the last selected
source.
for three