Toshiba TDP-FF1AU 소유자 매뉴얼 - 페이지 22
{카테고리_이름} Toshiba TDP-FF1AU에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-FF1AU 48 페이지. Svga 800 x 600
Toshiba TDP-FF1AU에 대해서도 마찬가지입니다: 사양 (2 페이지), 사양 (2 페이지)
페이지 인쇄
Using the remote control
Changing the new lithium battery
Remove the battery compartment.
Insert the battery compartment.
Operating the remote control
Turn on the projector and then the remote control can be used to adjust the OSD,
volume, and input select.
Note
• The remote control is shipped with a plastic sheet between the battery and its contact.
Pull on the sheet to remove it from the remote control.
• Remove the battery from the remote control when it will not be used for an extended
period.
Battery
• Before using the battery, please refer to the notes on
• If the remote control stops working, or if its range decreases, replace the battery with new
one.
The remote control
• The remote control may fail to operate if the infrared remote sensor is exposed to bright
sunlight or fluorescent lighting.
• Do not drop or bang it.
• Do not leave it in hot or humid locations.
• Do not get it wet or place on top of wet objects.
• Do not take it apart.
• In rare cases, ambient conditions could impede the operation of the remote control. If this
happens, point the remote control at the main unit again, and repeat the operation.
Replace the lithium battery.
Be sure to align the battery according to
the polarity.
.
22