Toshiba TDP-P8 사용자 설명서 - 페이지 37

{카테고리_이름} Toshiba TDP-P8에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-P8 42 페이지. User manual
Toshiba TDP-P8에 대해서도 마찬가지입니다: 사양 (2 페이지)

Appendices (Continued)

Warning: Lamp

compartment is hot!

Allow it to cool down

before changing lamp!

Warning: To

reduce the risk of

personal injury, do not

drop the lamp module

or touch the lamp bulb.

The bulb may shatter

and cause injury if it is

dropped.

Used Lamps

This projector's lamps contain trace amounts of environmentally harmful inorganic mercury.

Be careful not to break used lamps, and dispose of them in accordance with local regulations.

Replacing the lamp

The projector will detect the lamp life itself. It will show you a

warning message "The Lamp life is ending" When you see this

message, change the lamp.

Make sure the projector has been cooled down for at least

one hour before changing the lamp.

Lamp Replacing Procedure:

1. Switch off the power to the projector by pressing the Power

button twice.

2. Allow the projector to cool down at least 1 hour.

3. Disconnect the power cord.

4. Use a screwdriver to remove the screw from the cover.

5. Push up and remove the cover.

6. Remove the 2 screws from the lamp module.

7. Pull out the lamp module. 

To replace the lamp module, reverse the previous steps.

8. Reset the lamp timer.