Toshiba TDP-WX5400U 소유자 매뉴얼 - 페이지 23

{카테고리_이름} Toshiba TDP-WX5400U에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TDP-WX5400U 42 페이지. Toshiba tdp-wx5400: user guide
Toshiba TDP-WX5400U에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지)

페이지 인쇄

Using handy features (Continued)

Freezing the image (Freeze)



This function is used to pause or freeze a video during a presentation.

Press the remote control's FREEZE button.

The picture will pause. To release the freeze function, press the

FREEZE button again.

Notes

•

Other operations will also release the freeze.

•

Even if an image is frozen on the projector, the pictures are

running on the video or other equipment.

•

Using this function on commercial video software, broadcast or cable-

broadcasting except for the purpose of your private viewing and

listening may infringe the copyright protected by the copyright laws.

Setting the password



How to set password (from [Off] to [On])

To set the security password, refer to the

following guide.

Press the Menu button on the projector

or remote control to display the Main

Menu. Scroll to the [Setting] menu using

p or q and press Enter.

Select [Setting 2] using t or u and

press Enter.

Select [Password] using p or q and

press Enter.

Select [On] then [OK] and press

Enter.

The password entry screen is displayed.

Enter a password between 4 and 10

characters using the arrow keys of

the remote control. Press Enter.

Re-enter the password for

confirmation and press Enter.

Select [OK] using the remote control and

press Enter to enable the password.

Note

•

Please do not forget your password. If you forget the password, you can not release the

password by yourself.

•

In such a case, please contact your dealer.

Remote

control

How to operate when password is [On]

Turn on the power.

The lamp lights and the password entry screen appears.

Enter the password using the arrow keys of the remote control.

If the entered password is correct, the start-up screen appears and the projector

goes into normal operation. If the password is wrong, a message will appear

prompting you to re-enter the password, and the password entry screen is displayed

again. If you enter an incorrect password for more than 5 times, the projector will

automatically power off and enter standby mode.

Note

•

When the password setting is [On], the password will be enabled only when the

power is turned on for the first time after the main power switch has been on.

The password function will not be activated if the power backed on while it is

standby mode without turning off the main power switch.

How to set password (from [On] to [Off])

Select [Password] in the

[Setting 2] menu and press

Enter.

The password entry screen is

displayed.

Enter the password using

the arrow keys of the remote

control.

Select [Off] and press Enter

to disable the password.