Toshiba TLP-ET1U 소유자 매뉴얼 - 페이지 17

{카테고리_이름} Toshiba TLP-ET1U에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TLP-ET1U 50 페이지. 3lcd projector

Operations

Connect the power cord.

(Supplied) Power cord

connector

Remove the lens cover.

LCD Panels

LCD panels wear out. In order to prolong the lifetime of your LCD panel, take the following

precautions:

• In order to extend the lifetime of the LCD panel, always turn off the power when not in use, and make sure that

the lamp is off. Keeping the lamp off is also very effective at saving electricity.

• If the air filter becomes dirty and clogged, the projector's internal temperature will rise, shortening the lifetime of

the LCD panel and causing malfunctions. Clean the air filter from time to time (see

periodically. Contact the store where you purchased your projector, or your local Service Station for replace-

ment of the air filters.

The projector's LCD panel is made using extremely advanced technology, but there may be black

spots (pixels that do not light) or bright spots (pixels that are constantly lit) on the panel. Please

note that these are not malfunctions.

q Insert the power cord connector into the AC IN socket on the

projector.

w Insert the power cord plug into a wall or other power outlet.

When the power cord is plugged in, the ON indicator comes on in

orange, indicating that the unit is on standby.

LAMP

TEMP FAN

(Orange)

Lit

Be sure to remove the lens cover when the power is turned on. If it is left

on, it could become deformed due to heat.

p.40), and replace it